ECU-TUNINGFILES.COM / VEHICLE DATA
Steyr 6000 serie (generation not specified) tuning files
Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.
| Engine | Stock hp | Stock Nm | Stage 1 hp | Stage 1 Nm | Power gain | Torque gain |
|---|---|---|---|---|---|---|
| 6115 116 hp | 116 | 520 | 145 | 625 | +29 hp / 25 % | +105 Nm / 20.2 % |
| 6125 125 hp | 125 | 566 | 150 | 660 | +25 hp / 20 % | +94 Nm / 16.6 % |
| 6130 6.7 CVT Ecotech 133 hp | 133 | 631 | 165 | 800 | +32 hp / 24.1 % | +169 Nm / 26.8 % |
| 6135 136 hp | 136 | 612 | 170 | 735 | +34 hp / 25 % | +123 Nm / 20.1 % |
| 6135 CVT 137 hp | 137 | 570 | 170 | 685 | +33 hp / 24.1 % | +115 Nm / 20.2 % |
| 6140 141 hp | 141 | 613 | 160 | 670 | +19 hp / 13.5 % | +57 Nm / 9.3 % |
| 6140 CVT 141 hp | 141 | 585 | 165 | 660 | +24 hp / 17 % | +75 Nm / 12.8 % |
| 6145 6.7 CVT Ecotech 148 hp | 148 | 698 | 182 | 850 | +34 hp / 23 % | +152 Nm / 21.8 % |
| 6145 CVT 147 hp | 147 | 610 | 185 | 730 | +38 hp / 25.9 % | +120 Nm / 19.7 % |
| 6150 CVT 151 hp | 151 | 520 | 170 | 650 | +19 hp / 12.6 % | +130 Nm / 25 % |
| 6155 CVT 156 hp | 156 | 660 | 195 | 790 | +39 hp / 25 % | +130 Nm / 19.7 % |
| 6160 6.7 L CVT Ecotech 162 hp | 162 | 767 | 208 | 940 | +46 hp / 28.4 % | +173 Nm / 22.6 % |
| 6160 CVT 160 hp | 160 | 675 | 185 | 750 | +25 hp / 15.6 % | +75 Nm / 11.1 % |
| 6165 CVT 169 hp | 169 | 774 | 215 | 970 | +46 hp / 27.2 % | +196 Nm / 25.3 % |
| 6170 CVT 171 hp | 171 | 725 | 215 | 870 | +44 hp / 25.7 % | +145 Nm / 20 % |
| 6175 CVT 175 hp | 175 | 745 | 200 | 800 | +25 hp / 14.3 % | +55 Nm / 7.4 % |
| 6190 CVT 192 hp | 192 | 790 | 240 | 950 | +48 hp / 25 % | +160 Nm / 20.3 % |
| 6195 CVT 196 hp | 196 | 792 | 245 | 950 | +49 hp / 25 % | +158 Nm / 19.9 % |
| 6225 CVT 225 hp | 225 | 850 | 265 | 1,000 | +40 hp / 17.8 % | +150 Nm / 17.6 % |
Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.
Credits and software options
The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.
View prices and credits →Availability depends on the ECU and software version.
Questions before ordering
Which original file should I send?
Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →
Are these guaranteed results?
No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.
How do I request a revision?
Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →
Send the original. Discuss the file.
Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.