ECU-TUNINGFILES.COM / VEHICLE DATA
Mercedes-Benz E (W213, 2016-2019) tuning files
Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.
| Engine | Stock hp | Stock Nm | Stage 1 hp | Stage 1 Nm | Power gain | Torque gain |
|---|---|---|---|---|---|---|
| 200 (2.0T) 197 hp | 197 | 320 | 270 | 450 | +73 hp / 37.1 % | +130 Nm / 40.6 % |
| 200 - 184 hp | 184 | 300 | 230 | 390 | +46 hp / 25 % | +90 Nm / 30 % |
| 200d 150 hp | 150 | 360 | 200 | 440 | +50 hp / 33.3 % | +80 Nm / 22.2 % |
| 200d 160 hp | 160 | 360 | 180 | 400 | +20 hp / 12.5 % | +40 Nm / 11.1 % |
| 220d 194 hp | 194 | 400 | 230 | 460 | +36 hp / 18.6 % | +60 Nm / 15 % |
| 250 - 211 hp | 211 | 350 | 230 | 400 | +19 hp / 9 % | +50 Nm / 14.3 % |
| 300 - 245 hp | 245 | 370 | 265 | 420 | +20 hp / 8.2 % | +50 Nm / 13.5 % |
| 300d 245 hp | 245 | 500 | 270 | 560 | +25 hp / 10.2 % | +60 Nm / 12 % |
| 300de 306 hp | 306 | 700 | 335 | 760 | +29 hp / 9.5 % | +60 Nm / 8.6 % |
| 300e 320 hp | 320 | 700 | 350 | 760 | +30 hp / 9.4 % | +60 Nm / 8.6 % |
| 350 299 hp | 299 | 400 | 348 | 451 | +49 hp / 16.4 % | +51 Nm / 12.8 % |
| 350d 258 hp | 258 | 620 | 300 | 720 | +42 hp / 16.3 % | +100 Nm / 16.1 % |
| 350d 286 hp | 286 | 600 | 380 | 800 | +94 hp / 32.9 % | +200 Nm / 33.3 % |
| 350e Hybrid 286 hp | 286 | 550 | 330 | 650 | +44 hp / 15.4 % | +100 Nm / 18.2 % |
| 400 - 333 hp | 333 | 480 | 400 | 580 | +67 hp / 20.1 % | +100 Nm / 20.8 % |
| 400d 340 hp | 340 | 700 | 380 | 820 | +40 hp / 11.8 % | +120 Nm / 17.1 % |
| 43 AMG 401 hp | 401 | 520 | 420 | 620 | +19 hp / 4.7 % | +100 Nm / 19.2 % |
| 450 - 367 hp | 367 | 500 | 410 | 590 | +43 hp / 11.7 % | +90 Nm / 18 % |
| 53 AMG 435 hp | 435 | 520 | 460 | 620 | +25 hp / 5.7 % | +100 Nm / 19.2 % |
| 63 AMG 571 hp | 571 | 750 | 650 | 850 | +79 hp / 13.8 % | +100 Nm / 13.3 % |
| 63 AMG S 612 hp | 612 | 850 | 690 | 950 | +78 hp / 12.7 % | +100 Nm / 11.8 % |
Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.
DAMOS / MapPack enquiries
The following catalogue references include a matching model or chassis designation. They are enquiry links, rather than confirmation that a particular definition matches your software. Include the original BIN/ORI and ECU identification.
Mapswitch ECU references for this model: MED17.7.5. Check the supported variant →
Credits and software options
The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.
View prices and credits →Availability depends on the ECU and software version.
Questions before ordering
Which original file should I send?
Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →
Are these guaranteed results?
No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.
How do I request a revision?
Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →
Send the original. Discuss the file.
Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.