ECU-TUNINGFILES.COM / VEHICLE DATA
Mercedes-Benz C (W205, 2014-2018) tuning files
Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.
| Engine | Stock hp | Stock Nm | Stage 1 hp | Stage 1 Nm | Power gain | Torque gain |
|---|---|---|---|---|---|---|
| 160 (1.6T) 129 hp | 129 | 210 | 175 | 310 | +46 hp / 35.7 % | +100 Nm / 47.6 % |
| 180 (1600cc) 156 hp | 156 | 250 | 175 | 310 | +19 hp / 12.2 % | +60 Nm / 24 % |
| 180 CDI (1600cc) 116 hp | 116 | 280 | 160 | 380 | +44 hp / 37.9 % | +100 Nm / 35.7 % |
| 180 CDI (2100cc) 120 hp | 120 | 300 | 200 | 460 | +80 hp / 66.7 % | +160 Nm / 53.3 % |
| 200 - 184 hp | 184 | 300 | 230 | 420 | +46 hp / 25 % | +120 Nm / 40 % |
| 200 CDI (1600cc) 136 hp | 136 | 320 | 165 | 390 | +29 hp / 21.3 % | +70 Nm / 21.9 % |
| 200 CDI (2100cc) 136 hp | 136 | 360 | 210 | 500 | +74 hp / 54.4 % | +140 Nm / 38.9 % |
| 200d 160 hp | 160 | 360 | 180 | 400 | +20 hp / 12.5 % | +40 Nm / 11.1 % |
| 220 CDI 163 hp | 163 | 400 | 250 | 500 | +87 hp / 53.4 % | +100 Nm / 25 % |
| 220 CDI 170 hp | 170 | 400 | 210 | 470 | +40 hp / 23.5 % | +70 Nm / 17.5 % |
| 250 - 211 hp | 211 | 350 | 230 | 420 | +19 hp / 9 % | +70 Nm / 20 % |
| 250 CDI 204 hp | 204 | 500 | 240 | 550 | +36 hp / 17.6 % | +50 Nm / 10 % |
| 300 - 245 hp | 245 | 370 | 265 | 420 | +20 hp / 8.2 % | +50 Nm / 13.5 % |
| 300 CDI Hybrid 231 hp | 231 | 550 | 260 | 610 | +29 hp / 12.6 % | +60 Nm / 10.9 % |
| 350 e Hybrid 279 hp | 279 | 600 | 330 | 650 | +51 hp / 18.3 % | +50 Nm / 8.3 % |
| 400 - 333 hp | 333 | 480 | 415 | 600 | +82 hp / 24.6 % | +120 Nm / 25 % |
| 43 AMG 367 hp | 367 | 520 | 420 | 620 | +53 hp / 14.4 % | +100 Nm / 19.2 % |
| 450 AMG 367 hp | 367 | 520 | 420 | 590 | +53 hp / 14.4 % | +70 Nm / 13.5 % |
| 63 AMG 476 hp | 476 | 650 | 570 | 850 | +94 hp / 19.7 % | +200 Nm / 30.8 % |
| 63 AMG S 510 hp | 510 | 700 | 570 | 850 | +60 hp / 11.8 % | +150 Nm / 21.4 % |
Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.
DAMOS / MapPack enquiries
The following catalogue references include a matching model or chassis designation. They are enquiry links, rather than confirmation that a particular definition matches your software. Include the original BIN/ORI and ECU identification.
Mapswitch ECU references for this model: MED17.7.5. Check the supported variant →
Credits and software options
The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.
View prices and credits →Availability depends on the ECU and software version.
Questions before ordering
Which original file should I send?
Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →
Are these guaranteed results?
No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.
How do I request a revision?
Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →
Send the original. Discuss the file.
Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.