ECU-TUNINGFILES.COM / VEHICLE DATA
Iveco Stralis (generation not specified) tuning files
Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.
| Engine | Stock hp | Stock Nm | Stage 1 hp | Stage 1 Nm | Power gain | Torque gain |
|---|---|---|---|---|---|---|
| 273 hp | 273 | 950 | 330 | 1,160 | +57 hp / 20.9 % | +210 Nm / 22.1 % |
| 310 hp | 310 | 1,300 | 370 | 1,620 | +60 hp / 19.4 % | +320 Nm / 24.6 % |
| 330 hp | 330 | 1,400 | 390 | 1,720 | +60 hp / 18.2 % | +320 Nm / 22.9 % |
| 350 hp | 350 | 1,280 | 410 | 1,630 | +60 hp / 17.1 % | +350 Nm / 27.3 % |
| 360 hp | 360 | 1,500 | 420 | 1,850 | +60 hp / 16.7 % | +350 Nm / 23.3 % |
| 400 hp | 400 | 1,800 | 465 | 2,150 | +65 hp / 16.3 % | +350 Nm / 19.4 % |
| 420 hp | 420 | 1,900 | 485 | 2,275 | +65 hp / 15.5 % | +375 Nm / 19.7 % |
| 430 hp | 430 | 1,900 | 495 | 2,275 | +65 hp / 15.1 % | +375 Nm / 19.7 % |
| 450 hp | 450 | 2,100 | 520 | 2,500 | +70 hp / 15.6 % | +400 Nm / 19 % |
| 460 hp | 460 | 2,150 | 520 | 2,400 | +60 hp / 13 % | +250 Nm / 11.6 % |
| 480 hp | 480 | 2,200 | 550 | 2,600 | +70 hp / 14.6 % | +400 Nm / 18.2 % |
| 500 hp | 500 | 2,300 | 575 | 2,700 | +75 hp / 15 % | +400 Nm / 17.4 % |
| 540 hp | 540 | 2,350 | 610 | 2,800 | +70 hp / 13 % | +450 Nm / 19.1 % |
| 560 hp | 560 | 2,500 | 630 | 3,000 | +70 hp / 12.5 % | +500 Nm / 20 % |
Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.
Credits and software options
The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.
View prices and credits →Availability depends on the ECU and software version.
Questions before ordering
Which original file should I send?
Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →
Are these guaranteed results?
No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.
How do I request a revision?
Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →
Send the original. Discuss the file.
Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.