ECU-TUNINGFILES.COM / VEHICLE DATA

DAF XF (generation not specified) tuning files

Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.

DAF XF (generation not specified) · Stock and Stage 1
EngineStock hpStock NmStage 1 hpStage 1 NmPower gainTorque gain
105 410 hp4102,0004902,300+80 hp / 19.5 %+300 Nm / 15 %
105 460 hp4602,3005402,600+80 hp / 17.4 %+300 Nm / 13 %
105 510 hp5102,5005902,800+80 hp / 15.7 %+300 Nm / 12 %
106 410 hp4102,0004882,236+78 hp / 19 %+236 Nm / 11.8 %
106 460 hp4602,3005112,629+51 hp / 11.1 %+329 Nm / 14.3 %
381 381 hp3811,7504552,050+74 hp / 19.4 %+300 Nm / 17.1 %
430 428 hp4281,9504902,300+62 hp / 14.5 %+350 Nm / 17.9 %
480 480 hp4802,1005572,480+77 hp / 16 %+380 Nm / 18.1 %
530 530 hp5302,3506052,800+75 hp / 14.2 %+450 Nm / 19.1 %
95 380 hp3801,7504652,050+85 hp / 22.4 %+300 Nm / 17.1 %
95 430 hp4301,9504902,250+60 hp / 14 %+300 Nm / 15.4 %
95 480 hp4802,1005552,490+75 hp / 15.6 %+390 Nm / 18.6 %
95 530 hp5302,3506102,830+80 hp / 15.1 %+480 Nm / 20.4 %

Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.

Credits and software options

The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.

View prices and credits →

Availability depends on the ECU and software version.

Questions before ordering

Which original file should I send?

Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →

Are these guaranteed results?

No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.

How do I request a revision?

Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →

Send the original. Discuss the file.

Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.