ECU-TUNINGFILES.COM / VEHICLE DATA
Audi A5 (MK2, 2012-2016) tuning files
Compare the recorded stock and Stage 1 power and torque below. Choose an engine to open the visual comparison and prepare your file enquiry. The values describe Stage 1 only; hardware-based Stage 2 work is quoted after checking the configuration.
| Engine | Stock hp | Stock Nm | Stage 1 hp | Stage 1 Nm | Power gain | Torque gain |
|---|---|---|---|---|---|---|
| 1.8 TFSI 144 hp | 144 | 280 | 220 | 380 | +76 hp / 52.8 % | +100 Nm / 35.7 % |
| 1.8 TFSI 170 hp | 170 | 320 | 220 | 380 | +50 hp / 29.4 % | +60 Nm / 18.8 % |
| 1.8 TFSI 177 hp | 177 | 320 | 220 | 380 | +43 hp / 24.3 % | +60 Nm / 18.8 % |
| 2.0 TDI CR 136 hp | 136 | 320 | 190 | 420 | +54 hp / 39.7 % | +100 Nm / 31.3 % |
| 2.0 TDI CR 143 hp | 143 | 320 | 190 | 420 | +47 hp / 32.9 % | +100 Nm / 31.3 % |
| 2.0 TDI CR 150 hp | 150 | 320 | 190 | 420 | +40 hp / 26.7 % | +100 Nm / 31.3 % |
| 2.0 TDI CR 163 hp | 163 | 350 | 205 | 430 | +42 hp / 25.8 % | +80 Nm / 22.9 % |
| 2.0 TDI CR 177 hp | 177 | 380 | 205 | 430 | +28 hp / 15.8 % | +50 Nm / 13.2 % |
| 2.0 TDI CR 190 hp | 190 | 400 | 225 | 460 | +35 hp / 18.4 % | +60 Nm / 15 % |
| 2.0 TFSI 211 hp | 211 | 350 | 260 | 470 | +49 hp / 23.2 % | +120 Nm / 34.3 % |
| 2.0 TFSI 225 hp | 225 | 350 | 300 | 450 | +75 hp / 33.3 % | +100 Nm / 28.6 % |
| 3.0 TDI 204 hp | 204 | 400 | 235 | 460 | +31 hp / 15.2 % | +60 Nm / 15 % |
| 3.0 TDI 245 hp | 245 | 500 | 305 | 600 | +60 hp / 24.5 % | +100 Nm / 20 % |
| 3.0 TFSI 272 hp | 272 | 400 | 435 | 535 | +163 hp / 59.9 % | +135 Nm / 33.8 % |
| RS5 4.2 V8 450 hp | 450 | 430 | 470 | 455 | +20 hp / 4.4 % | +25 Nm / 5.8 % |
| S5 3.0 TFSI 333 hp | 333 | 440 | 435 | 520 | +102 hp / 30.6 % | +80 Nm / 18.2 % |
Indicative figures. Actual results depend on the software version, hardware and condition of the vehicle.
Credits and software options
The current Stage 1 base service is 1 credit. Check the price list for package terms, included options and any additional work. A vehicle listing does not confirm availability of every service.
View prices and credits →Availability depends on the ECU and software version.
Questions before ordering
Which original file should I send?
Send the unmodified file obtained with your flash tool, together with the ECU or TCU identification and the read method. State whether it is a normal read, virtual read or slave container. Keep the original backup separately. File formats and backups →
Are these guaranteed results?
No. The figures are reference values for the listed engine. Software revision, installed hardware, fuel and vehicle condition affect the achievable result. The workshop remains responsible for diagnosis and the checks on the vehicle.
How do I request a revision?
Keep the original file, delivered version and logs in the same portal order. Describe the operating condition and observed behaviour so the revision can address a reproducible issue. Preparing logs →
Send the original. Discuss the file.
Include the vehicle, engine, software identification, flash tool and any hardware changes. The technical scope is agreed for the actual file, rather than inferred from a power figure alone.